This is the Hitec X4 AC Pro AC/DC Four Port Multi-Charger for NiMH, NiCd, LiPo, LiFe, Lilon, LiHV, and Pb/Lead Acid batteries. It will charge 1-6S lithium, 1-15 cell NiMH/NiCd, and 2-20V Lead Acid batteries it capacities of 100-50,000mAh.
The charger includes a universal balancing board, an XH-type balancing board, XT60 charge cable, Deans/T-type charge cable, two charge cables with bare wires (no connectors), receiver battery charge cable, DC power cord, AC power cord, and instruction manual. Building on the popularity of our X4 AC Plus, we decided to take it up a notch with the introduction of our X4 AC Pro high-performance, microprocessor-controlled charger/discharger with extensive battery management capabilities.Capable of operating on 100-240 volts AC household current or from an 11-18 volts DC power source, this new multi-faceted powerhouse exudes a total charge circuit power of 200 watts with Power Distribution capability in AC mode and a 300-watt output when in DC mode. The X4 AC Pro allows you to connect up to four batteries of varying chemistries (NiMH/NiCd/LiPo/LiFe/Lilon/LiHV/Pb) to any of the charging channels with each channel performing independently of one another. Additional features include our "Charge Master" software, providing the unprecedented ability to operate your charger via your personal computer plus a built-in Bluetooth for Smartphone app operation. Experience the future of charging with Hitec! Charges the following battery types.
1-6 cell LiPo, LiHV, LiFe and LiIon. Total charge circuit power of 200 watts with Power Distribution capability in AC mode and a 300-watt output in DC mode. Charges or discharges up to four batteries with different chemistries at once. Ten battery memories per channel.Charge Master software allows charger operation via personal computer. Two Charge Cables with bare wires (no connectors).
AC Input: 100 - 240 Volts AC. DC Input: 11 - 18 Volts DC. Total Charge Circuit Power on AC Power: 200W w/Power Distribution. Channels A & C: 100 Watts Total. Channels B & C: 100 Watts Total.Channels A & B: 50 - 100 Watts. Channels C & D: 0 - 50 Watts. Total Charge Circuit Power on DC Power. Channels A & B: 100 Watts each / Channels C & D 50 Watts each. Channels A & B: 0.1 - 10.0 Amps.
Channels C & D: 0.1 - 5.0 Amps. Discharge Wattage: 10 Watts per Channel. Discharge Current: 0.1 - 2.0 Amps per Channel. Discharge Current for Lithium Battery Balance: 200mAh.
Battery Capacity Range: 100 - 50,000mAh. Auxillary Output: 5 Volt 2.1 Amp DC USB Device Charge Port. USB Port for PC Control & Firmware Upgrades.
Bluetooth 4.0 for Smartphone Apps. Dimensions: 3.8 x 7.2 x 2.8 (97 x 182 x 71mm). This item is in the category "Toys & Hobbies\Radio Control & Control Line\RC Model Vehicle Parts & Accs\Control, Radio & Electronics\Chargers".The seller is "rchobbyexperts" and is located in this country: US. This item can be shipped worldwide.